How To Fix Windows Stop Code Memory Management BSOD?

Windows 10 is one of the most remarkable versions of the operating system that Microsoft ever developed. It rarely crashes and is pretty good. But just like everything, it isn’t perfect.

This window version sometimes reflects the Blue Screen of Death or BSOD error when an issue with Windows stop code memory management.

Despite its tough-sounding name, it is effortless to fix such errors by troubleshooting in many cases.

It signals to look into the system memory so that one can fix this issue. To put it simply, TechAmple has compiled everything about this memory management error.

Scroll down the page to know the causes and methods to resolve this trouble.

What is memory management?

Memory management holds tremendous significance in Windows 10 operating system.

It handles the system’s memory, which is the key to a healthy and running technique. This is mainly required on a device for smooth functioning.

This monitors everything saved into the memory irrespective of its use. It also manages its changes and reads into the RAM and the memory while executing a command.

Once you stop using a program, it transfers the memory so that other programs can be run.

When it goes wrong, the system will regularly display the error for memory management BSOD on the screen.

What Causes the Windows Stop Code Memory Management BSOD?

The Windows Stop Code Memory management BSODs are caused when a program in the process fails to complete its task.

The available RAM is then put into use for that completion that ends up eating the remaining amount of memory, increasing the chances of system failure.

The memory management BSOD error is the expected outcome.

Other factors that could be the reason for that error can be the following reasons:

• Old and un-updated software
• Damaged drives and files
• Hardware issue
• Hard drive or RAM error
• Software issues, including corrupted files
• Problems with new hardware such as graphic card
• Virus and malware infection
• Outdated operating system

How to fix Windows Stop Code Memory Management on Windows 10?

Since you are aware of the causes of BSOD, it’s time to figure out the best solutions to resolve this trouble as soon as possible. Here are some issues to fix the windows stop code memory management on Windows 10.

1. Scan your PC for possible virus or malware infection and fix it

Before jumping to any complex method, checking your system for malware or virus is always a good idea. This is one of the leading causes of the BSOD error.

For Malware infection

1. Close all functioning applications and programs
2. Go to the control panel and choose the Windows Security setting
3. In that, select the windows defender offline scan and press on scan now
4. This will automatically detect and remove the malware
5. After the PC restarts itself, visit the Windows security settings
6. Open virus and threat protection and choose protection history.

For Virus infection

1. Keep pressing on shift button and click on the power icon and choose to restart
2. When it restarts, it has a menu with advanced boot options and elects to troubleshoot
3. Click on the advanced option and select the startup setting and press restart.
4. Press 5 to restart in safe mode with the networking option
5. In safe mode, go to windows administrative tools and choose disk clean up.
6. In the drop-down box that’s named files to delete and select the temporary files
7. If that doesn’t work, install anti-virus software and run a scan
8. You can also use the windows registry to find and delete them manually.

2. Run Windows Memory Diagnostic tool

The Windows Memory Diagnostic Tool is a built-in Windows 10 tool that helps find and resolve system errors associated with Windows memory.

The tool will test the RAM of your system to detect if there is any trouble that is affecting its functionality.

Below are the steps to run this tool and eliminate the Windows Stop Code error.

1. First, you must press the Windows key and R together to open the run module.
2. Type mdsched.exe and press enter
3. Windows memory diagnostic tool drop-down box will then appear on the screen with a bunch of options.
4. There, you are required to select restart now and check for problems. Save all the files and close them; after pressing ok, the device will start rebooting automatically.
5. If you are busy, check for problems again when I reboot it.
6. After restarting, it will automatically scan for the problems. Please wait for some time to finish it.
7. Once the scanning is completed, it will display the result on your screen.
8. If it doesn’t show anything, then the memory is okay, and there’s another issue for which you need to use other methods on the list.

Screenshots from Steps 1 and 2: mdsched.exe 

Screenshots from Steps 3 and 4: Windows Memory Diagnostic 

Screenshot from step 4: Windows memory diagnostic tool

3. Scan and repair disk error

Disk errors can be caused by hardware issues, which lead to the BSOD error in Windows 10. Here’s the step-by-step guide to scanning and repairing disk errors smoothly.

1. Press the Windows button and click on the search bar
2. In the search bar, type command prompt, and by right-clicking a drop-down box appears
3. Choose the run as administrator option.
4. Click on yes to allow it to launch with an administrative allowance.
5. Type chkdsk C:/f/r and press enter. If you want to check another drive, replace the C with another drive’s name.
6. If you see an error saying Chkdsk cannot be run because another process uses the device, type Y and press enter. It will scan and repair when you reboot the machine.
7. Start the device again. Let the check disk command run as this process will try to fix the errors and recover any helpful material.

4. Repair corrupted system files.

Sometimes, a memory-managed BSOD problem arises in the system due to the corrupted system files.

The simple way to deal with the same is to find those files and get them repaired as soon as possible through SFC Scan.

Before jumping to the steps, let’s figure out SFC in more detail. SFC, System File Checker, is a built-in tool that helps Windows 10 to solve its common issues. Execute the step-by-step mentioned below.

1. Go to the windows button on-screen on the left bottom corner and tap on the search bar.
2. In the search bar, type cmd or CMD and right-click on it.
3. When the drop-down box appears, choose run as an administrator.
4. Click yes to give it the allowance to run it with authority.
5. When the Command prompt is displayed, type SFC/scan now and press enter button.
6. Let the scan end, and don’t close the command prompt before the scan is complete. It will fix the error and save the necessary files that need to be restored.

5. Update and install the pending windows update

Is it still facing trouble? Opt for updating and installing the pending windows update and check if it helps resolve the error from your system.

1. Firstly, tap on the Windows button on the keyboard. Or else, you can click on start on the taskbar and Choose a setting tab. Alternatively, the users can hold the Windows key and I together to open the Settings option.
2. Tap on the update and security tile present there. It shows the update settings on the windows device.
3. In the windows update section, choose the view option update if available.
4. Maximize the driver’s update section and go through the list of drivers that are in need to be updated
5. Select the drivers and then press the download and install option.
6. Now, allow your windows to update the drivers and reboot your system.

6. Clear temporary files and folders

Removing the temporary files and folders from your system might help resolve window stop code trouble. Follow the steps mentioned here.

1. To initiate, click on the windows button and open the search bar.
2. Type disk clean up in the search bar and click on the first search
3. Choose the Windows 10 device system drive and then press enter or click on ok.
4. When a pop-up window is displayed, it will show all the temporary files.
5. Select the temporary files and temporary internet files. Don’t forget the thumbnails and files with the name cache.
6. After selecting all the files, you want to terminate, click on ok or press enter.
7. Another dialog box pops open and clicks on the delete files option
8. A warning pop-up will open asking you if you are sure you want to delete/ remove these files; press yes.

7. Check newly installed applications and programs.

Last but not least method to resolve this BSOD error is to check the newly installed applications and programs. Carry out the procedure mentioned below.

1. First, press the keyboard’s Windows button and choose the setting.
2. After that, open the application’s title; it displays all the programs installed by you.
3. Choose the sorting open to arranging it in order of newly installed.
4. Now, click on the newly installed application and select the uninstall button.
5. Select the uninstall option again to confirm it.
6. The users must follow the on-screen prompt and give authority to remove the application.
7. Do the same to all the newly installed applications and restart to see if the blue screen of death error has been solved or not.

The Final Word:

This is all about stop code memory management. Most of these errors occur due to your irresponsible downloads from unsafe and uncertified websites online.

It can also happen when you use a USB without scanning it with anti-virus software. We hope you find our guide informative and helpful.

Once it enters the system, it spreads like a disease and generates too many issues. Don’t wait long and follow the abovementioned solutions to avoid this trouble.

If nothing works, you can reset your device. However, if all these steps don’t work, try contacting the Microsoft support page and going through blogs on the internet.

Getting help or advice from a professional before resetting your device is better. Maybe you went wrong somewhere or missed some of the steps he might include while repeating.